BACK TO TECH INFO | HOME

Material Specification and Applications for Molded Silicone Ferrite

Molded Silicone Ferrite (MSF) is a highly loaded FERRITE silicone rubber that can be used on areas of the board or chips where there are:

Spurious noise conditions
Surface currents causing crosstalk
Random undefined interference
Outside the board noise interference
Noise damping
Close proximity problems

This broadband material is usable at most RF and microwave frequencies. In most cases, the thickness is not a factor in its use except where saturation can occur. In many cases, the simple use of the MSF can save some very exotic mechanical changes to the board or housing.

It can be used on:

The housing cover
Directly over the chip or component
Between components used as a dam
Fabricated completely around an area or component
Covering the complete board surface between boards
Around flat cables

MSF is limited only by the users imagination and the severity of the problem.

SPECIFICATIONS
Color	Gray
Durometer (Shore A) +/- 7	50
Specific Gravity +/- 0.2	4.5
Insertion Loss (db/in) @3 GHz Free Space and Far Field	64
Maximum operating temp	225 degrees C

BACK TO TECH INFO | HOME

Contact Elastomeric Specialties, Inc.
5510 Brooks Street
Montclair, CA 91763
(909) 986-2335
Fax (909) 986-4456

Site Design by